CPU COOLER ARCTIC LIQUID FREEZER III 240 A-RGB Arctic Liquid Freezer III A-RGB: bright and powerful With the Liquid Freezer III A-RGB all-in-one CPU water cooling kit, Arctic puts all its know-how at the service of gaming thanks to an improved pump specially developed in-house and controlled by PWM. Thanks to this system, it doesn’t run at full load all the time, but adjusts its operation to the temperature of the processor to limit its noise level at rest. The system is completed by high static pressure fans and another 60 mm fan near the pump in charge of cooling the motherboard’s VRM circuits. Take advantage of Arctic expertise The Liquid Freezer III A-RGB is ready to use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the ducting of the hoses so that only one cable needs to be connected to the motherboard. MX-6 thermal paste included PWM-controlled 60 mm VRM fan provides socket area cooling when VRM cooling is insufficient, in case of poor airflow or especially in overclocking scenarios. The Liquid Freezer III A-RGB is equipped with a specially developed in-house PWM-controlled water pump that has been optimised in terms of performance and noise. The improved cold plate with an extended fin surface and optimised water lines allows the Liquid Freezer III to increase performance while maintaining quiet operation. The cooling surface of the 38 mm thick radiator has been extended by 23% thanks to the increased fin stack. This not only provides better heat dissipation, but also a greater volume of liquid. The Liquid Freezer III A-RGB relies on P-series fans with high static pressure. Technical specifications & manual General Specifications Warranty 6 Years TIM MX-6 (0.8 g) Operating Ambient Temperature 0—40 °C PI | NNPI 308 | 230 LED Connector 3-Pin A-RGB Connector All-In-One Connector 4-Pin PWM Connector Splitt Connector 3x 4-Pin PWM Connector Weight 1490 g Compatibillity Intel 1851, 1700 AMD AM5, AM4 Pump Specifications Pump 800—2800 rpm (PWM controlled) Current | Voltage 0.35 A | 12 V DC Cold Plate Copper, Micro Skived Fins Tube Length 450 mm Tube Diameter Outer: 12.4 mm Inner: 6.0 mm Radiator Specifications Material Aluminium Dimensions 277 (L) x 120 (W) x 38 (H) mm VRM Modul Specifications VRM Fan 400—2500 rpm (PWM controlled) Current | Voltage 0.05 A | 12 V DC LEDs 12x A-RGB LEDs Current | Voltage 0.40 A | 5 V DC Fan Specifications General 2x P12 PWM PST A-RGB Speed 200—2000 rpm Air Flow 48.82 cfm | 82.91 m3/h Static Pressure 1.85 mmH2O Bearing Fluid Dynamic Bearing Current | Voltage 0.11 A | 12 V DC Cable Lenght 40 mm Connector 4-Pin PWM Connector RGB Specifications LEDs 12x A-RGB LEDs Current | Voltage 0.40 V | 5 V DC Cable Lenght 40 mm 80 mm Splitter Cable Connector 3-Pin A-RGB Connector 3-Pin Plug Kategori: CPU Cooler, Komponente PC
